Secap 30k Print Driver

Secap Printers, CASS Certification and POSTNET Barcodes

Secap Release Notes - Printer Driver for Windows 2000/XP

Last updated : December 16, 2002

Close

Printer Driver Upgrade IMPORTANT

When upgrading Secap printer drivers, delete ALL Secap/Bryce printer drivers and REBOOT PC BEFORE upgrading to the new version. Failure to delete all the printer drivers before upgrading will result in bad paper sizes being used with old versions of the printer drivers. Failure to reboot may result in not having the latest printer driver installed.

For example: If you have a BOS 24K and BOS 24K memory overlay printer driver installed, delete BOTH printer drivers before installing a new version.

For example: If you have BOS 9K-L, BOS 24K and BOS 9K-LC/13K-C printer drivers installed, delete ALL the printer drivers and reboot PC before installing a new version.

Win2000 Users: IMPORTANT

Please make sure that Service Pack 3 is installed before installing this printer driver. Service Pack 2 has problems that will result in Winspool errors when using this printer driver. Windows XP users are not affected.

Version 1.8 16Dec2002

Correction

Printer Drivers for 30K, 24K, 26K and 22K, including memory overlay versions now properly support custom pages created using the File/Server Properties dialogue in the Printer Drivers window. The page height can vary from 0.5 to 3.0. The previous version of the printer driver did not support custom pages properly.

Version 1.7 12Nov2002

Enhancement

Printer Drivers for 22K, 22K memory overlay, 26K and 26K memory overlay have been added to the list of available printer models.

For 24K and 30K printer drivers

Print Orientation has now been moved from the Properties/Document Settings tab to the Printer Preferences/Advanced tab. This allows the Printer Orientation option to be available from any File/Print dialogue window, instead of only from the Printers folder.

For all shuttling head printers

Print Orientation, Feed Delay and Media Mode have been moved from the Properties/Document Settings tab to the Printer Preferences/Advanced tab. This allows these options to be available from any File/Print dialogue window, instead of only from the Printers folder.

The left margins for B4, B5 and C4 paper sizes are now correct. In previous version the margins were on the right side of the paper instead of the left side.

Version 1.6 13May2002

The 24K/30K printer drivers have been separated into two drivers, 24K printer drivers and 30K printer drivers. The memory configuration of the 24K is different than the 30K.

Two new printer drivers have been added, 20K-L and 24K-L printer drivers.

An additional printer font, POSTNET Courier, has been added to the list of available printer fonts. The other printer font is Courier. POSTNET Courier is a printer font available in Windows 95/98/ME and is now available in Win2000/XP to be upward compatible with files brought from Windows 95/98/ME.

The installation script file has been updated to prevent an occasional error where Windows 2000 would not install the printer driver.

The trailing PCL command -E has been removed from all printer drivers. This allows the last page of print jobs on shuttling head printers to be recovered properly and the last three pages on fixed head printers to be recovered properly.

Version 1.5 6 Dec 2001

A new menu option is available in the /Properties/Document Settings dialogue. The option is Print Orientation. The Print Orientation can be set to 1 Use Front Panel, 2 Normal Upright or 3 Invert. The default value is Use Front Panel. The Normal and Invert settings are equivalent to the main menu setting A. Address Layout 4. Orientation, Normal or Invert.

PCL commands have been added to the header of the print job to record the operating system, distributor and version of the printer driver. These commands are to aid in technical support.

A PCL command has been added to inform the printer that Windows 2000 does not output the ASCII character set for downloaded characters. This command is used to suppress output of the address in Address Recovery, as the address as sent by Windows 2000 is not legible. It also prevents the printer from accidentally printing a PLANET barcode string or seeing a false Postal Bundle Break. This applies to 24K, 24K-P and 30K printers with firmware version 113001 or later.

Version 1.4.3 8 Nov 2001

Corrections:

In the previous versions, the internal printer font Courier was not properly configured. The internal printer font Courier is provided for use with the xxxxx string, xxxxx string, for use with postal bundle break strings, and for use with ZIP codes. Secap printers will recognize the above strings properly when the strings are defined using the internal printer font Courier.

The left margin for C4 envelope was not correct. The default left margin is now correct for a C4 envelope.

Version 1.3 13 Aug 2001

In the previous version, some graphics would print with extra black underneath and to the right of the graphics. This extra black printing has been corrected.

Version 1.2 22 May 2001

This is the third production release of the 3K, 5K, 5K-L, 7K, 9K-L, 9K-LC, 11K, 13K, 24K, 24K-P and 30K Windows 2000 Printer Driver. The 9K-L printer driver may be used with 11K and 13K printers. The 9K-LC printer driver may be used with 13K-C printers. The 24K/30K and 24K/30K memory overlay printer drivers are for use with the 24K, 24K-P and 30K printers. The 3K/5K/7K/5K-L printer driver may be used with the 3K, 5K, 7K, 5K-L printers.

Enhancements:

The Secap 30K printer has been added to the list of supported printers. The 24K printer drivers have been replaced with a 24K/30K printer drivers. The 13K-C printer has been added to the 9K-LC printer driver. The 9K-LC printer driver is now called 9K-LC/13K-C printer driver.

The 5K-LE and 7K-E printers have been included in a new printer driver called 5K-LE/7K-E printer driver.

In the previous version, the page size Full Page Size 9.4in x 15in was not defined properly. It was defined to be 7.5 not 15 high. This has been corrected to this release. This correction only applies to shuttling head printers. It does not apply to 24K, 24K-P or 30K printers.

IMPORTANT: Before installing the new version of the printer driver. Remove the current page definition from your system. The procedure is as follows:

Select Start/Settings/Printers

Select File/Server Properties

Scroll through the list of forms until you see Full Page Size

Delete the Full Page Size form

Close the Print Server Properties window and install the new version of the printer driver.

Version 1.1 22 June 2000

This is the first production release of the 3K, 5K, 5K-L, 7K, 9K-L, 9K-LC, 11K, 13K, 24K and 24K-P Windows 2000 Printer Driver. The 9K-L printer driver may be used with 11K and 13K printers. The 9K-LC printer driver may be used with 13K-C printers. The 24K and 24K memory overlay printer drivers are for use with the 24K and 24K-P printers. The 3K/5K/7K/5K-L printer driver may be used with the 3K, 5K, 7K, 5K-L printers.

Restrictions:

The 9K-LC printer driver is a raster color printer driver only. There is no support at this time for black characters. All graphics and characters are printed using the color print head only. The printer driver does not use the black print head in any way. This limitation may be removed in a future release of this printer driver.

Secap printers use three technologies to store the printer s firmware: Printer Driver Notes choose your operating system and preferred format PDF: 2000/XP;.

Please feel free to download the zip files below and notes for most of the Secap/Bryce drivers. Each zip file contains the all of the Secap/Bryce drivers for your.

Please click on the Secap Address Printers listed below to download firmware driver updates. These products may have been purchased under the Bryce product name.

Printer Driver Upgrade IMPORTANT. When upgrading Secap printer drivers, delete ALL Secap/Bryce printer drivers and REBOOT PC BEFORE upgrading to the new.

Addrex Address Printer Support

Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com

ManualsPrinter Drivers

Manuals

Secap SA3100 / SA3150 Operator ManualSecap SA3300 / SA3350 Operator ManualSecap SA5000 Operator ManualSecap SA5300 Operator Manual

Legacy ModelsSecap 5K-LE Operator ManualSecap 9K-L Operator ManualSecap 13K Operator ManualSecap 22K Operator ManualSecap 26K Operator ManualSecap 30K Operator Manual

Printer Drivers

Current Model Secap Printer Drivers Network and USB interfaces only Download x86 version 32-bit - for Secap SA3000, SA3100, SA3150, SA3300, SA3350, SA5000n, SA5300n Download x64 version 64-bit - for Secap SA3000, SA3100, SA3150, SA3300, SA3350, SA5000n, SA5300n

Drivers are compatible with Windows XP, Vista, 7 8

Older Legacy Model Secap Printer Drivers Parallel and/or USB interfaces only Download - for Secap 5K-LE, 9K-L, 9K-LC, 13K, 13K-C, 22K, SA5000, 26K, 30K, SA5300, SA5300vt, Secap V-Jet, Secap Jet 1

Drivers are compatible with 32-bit and 64-bit versions of Windows XP, Vista, 7 8

Rena Mach 5 Digital Color Printer Operator ManualRena Mach X Digital Color Label Printer Operator ManualRena Envelope Imager CS Operator ManualRena Envelope Imager 1.5 / 1.5 Plus Operator ManualRena Envelope Imager 2.5 Operator ManualRena Envelope Imager 3.0 / 4.0 Operator ManualRena Envelope Imager XT 3.0 / XT 4.0 Operator ManualRena XPS-ProMail System Operator Manual

Click here for Legacy Model Rena Address Printer Manuals Username: customer password: iklo90

Rena Mach 5 Digital Color PrinterDownload Driver only - for printers with firmware 110928_u or higher Download Complete Install CD v1.6 - for printers with firmware 110928_u or higher Download Driver only - for printers with firmware 110513_x or lowerDownload Complete Install CD v1.5 - for printers with firmware 110513_x or lower

Rena Mach 5 Digital Color PrinterDownload Driver only - for printers with firmware 110928_u or higher Download Complete Install CD v1.6 - for printers with firmware 110928_u or higherDownload Driver only - for printers with firmware 110513_x or lowerDownload Complete Install CD v1.5 - for printers with firmware 110513_x or lower

Download For current models: Rena Envelope Imager CS, 1.5/1.5 Plus, 2.5, 3.0, 4.0, XT 3.0, XT 4.0, XPS-ProMail

For legacy models: Rena DA607, DA608, Imager 1, Imager 2, Imager 3, XPS 80, XPS 90

Addrex - Addresser Sales Company - 2014.

Secap Bryce 30K Tabletop Near-Production Address Printer. THIS IS A LEGACY MODEL ADDRESS PRINTER. C LICK BELOW FOR THE NEW REPLACEMENT.